Logos Life
EVO XS
Multi-spindle machining center developed on the concept of a portal machine with vertical axis arrangement of the spindles.
WATCH THE VIDEO
DOWNLOAD DATA SHEET
CONTACT US
A piece clamping system with double multiple grippers
and independent, gives high production capacity and flexibility allowing accessibility during processing
to all six sides of the pieces.
Tool magazine
The Tool Magazine is conceived as a RACK rack system with an electro-welded steel structure and with longitudinal sliding movement on guides with recirculating ball shoes.
The system allows tool change operations to be carried out simultaneously on all spindles, reducing downtime and consequently increasing productivity.
WATCH THE VIDEOTransport Pliers
The double grippers for locking the piece, with pneumatic closure and independent motorized longitudinal translation, have been sized and shaped in order to allow the best accessibility of machining with the tools on the piece.
They are managed as independent interpolation axes in order to ensure further flexibility with a consequent increase in production capacity.
WATCH THE VIDEOManipulator
The manipulator with portal structure exploits the electronic management of depth and height for the handling of the pieces in the plant.
The correct sizing of the structure and the use of gantry motors allow high repositioning precision, extreme rigidity and high handling speeds.
WATCH THE VIDEOOperating Heads
The T1 and T5 and TBR operating heads are the result of 20 years of relentless research and development. For example: the double lateral locking systems of the T5 operating heads (also in the variant with integrated C axis) provide flexibility and precision in positioning in order to always place the tool in the best “cutting” conditions and minimize stress on the electro-spindle.
WATCH THE VIDEOLoading System
Fully automated loading system, capable of simultaneously handling up to 10 pieces, optimizing their clamping in the grippers and being machined on the 6 faces.
It allows the dimensional verification of the incoming elements, the optimization of the pieces in a row, the preparation of the load and the management of pieces with different widths.
WATCH THE VIDEO REQUEST CUSTOMIZATIONDischarge
Modular and customized unloading system, which always allows compliance with the work sequence set during the loading phase.
It allows autonomy from a minimum of 1 hour up to 3 continuous shifts (UML), the execution of unloading operations, quality control and labeling.
WATCH THE VIDEO REQUEST CUSTOMIZATIONObtain more from your Working Process
Systems to support and complete the production process. Integration of different technological brands, managed and included in a Working Process project, with the same quality, efficiency and reliability.
UML multi-level unloading warehouse
Intelligent Finished-Part Storage System. The system caters to the storage of finished parts, up to a maximum of 1500 parts, which can be called up by the operator at the right time and automatically placed in the unloading/quality control area.
Water shower wetting station
Water shower wetting station and trolley drying system.
IMML multi-level smart warehouse
Intelligent storage system for single wooden parts.
The system, invented and patented by Working Process in 2010, ensures harmonious management of the material arriving from the first processing phase (cutting and planing): IMML, in fact, picks up and stores the cut-off and planed parts inside it and, at the same time, finishes off the parts on the machining centre according to a logic that optimises the productivity of the centre itself.
IMML part of the M.P.E. process.
LUML multi-level loading and unloading warehouse
Intelligent storage system for single wooden parts. The system ensures the harmonious management of the material arriving from the first processing phase (cutting and planing) and storage of the finished parts up to a maximum of 1500, which can be called up by the operator at the right time and automatically placed in the unloading/control area.